The fan heater is plugged into the current and is operated with a manual thermostat. It can be put into normal mode (Water up to 60º) or in Froost mode (Water up to 70º). To heat the water uses the heat from the air in the house using the heat pump and transferred to the deposit by means of a exchange of refrigerant fluids.The hydric panels make the aerothermal power is not visible affected by conditions therefore acting on days when the storm is not suitable, ensuring the supply at all times and also the durability of the equipment.

• You do not need annual reviews. Both water glycol that circulates inside like the anodetitanium in the tank, allows autonomyof the equipment if need of revision.

• It’s installation does not require large supports metal that are drilled into the tiles.

• Take advantage of solar, environmental and aerothermal energy.

• They are machines adapted to current CTE due to its great respect for the environment.

• Capable of heating to 60º under normal conditions (comfort mode) and 70º in Froost mode with what we ensure the anti-legionella system.

• It’s light consumption is very high, of each watt it consumes produces one watt of power.

• For the recovery of the same amount of water takes a longer time and the support of resistance if you want in short periods.

• They are usually murals without the possibility of integration into the environment.

• They are devices tending to their disappearance due to the great environmental impact they produce because they waste energy.

• It barely reaches 55º, which does not allow us to assure that it is a Legionella-free system. (From 60º).

• The 2WATER SERIES saves up to 80% energy with respect to electrical thermos. Of every watt that we consume we produce 4 of energy.

• 2WATER SERIES hot water recovery is really fast, up to 1000l / day.

• It can be wall or vertical integrating as an element of the environment of the house.

• They are machines adapted to current CTE due to its great respect for the environment.

• It is integrated into the home having the option wall or vertical and can be adapted to the needs of it.

• Quick hot water recovery.

• Capable of heating to 60º under normal conditions (comfort mode) and 70º in Froost mode with the that we ensure the anti-legionella system.

• High-density polyethylene with almost 6 liters of glycol water causes freezing at low temperatures is zero. This is very important to the durability of the equipment as it breaks morecommon in these systems are leaks.

• It is recommended to change the glycol water every year inside the panel and in summer the panel must be hiddenwith a rag.

• Its installation involves placing a large support where The equipment that needs support will go through screws to shingles.

• Take advantage of only solar energy.

• It’s performance is only possible on sunny days, having to make use of the electrical resistance remaining days, which means an additional cost of Energy. It is not sensitive to environmental changes.

• It is not integrated into the element in the house, it is housing which must be integrated into it.

• Slow recovery of hot water

• It barely reaches 55º, which does not allow us to assure that it is a Legionella-free system. (From 60º)

• The panel only carries glycol water in a part of the panel (circuit) with a maximum of 2.5 glycol water ithiums, which makes your freezing easier and the future leaks that this causes in the life of the quipment.